Automatic control of pressure profiles and automated labware
movements bring an all-new approach to SPE
Real-time pressure profile control is a critical component to successful extraction methods. Automated pressure control is now possible thanks to a completely new vacuum pump with full connectivity to the OneLab Software built-in.
With our signature, intuitive approach to method design, users can now easily program a pressure profile that will be strictly followed during protocol executions – without any manual, on-device interventions necessary.
After pipetting directly into extraction labware and triggering the Extraction+ Connected Vacuum Pump, the Andrew+ Robot can then grab, lift and move the Extraction+ collar back and forth between the idle and active positions of the manifold base. Moving the collar grants access to the insides of the device for automated exchanges of waste and collection labware.
When working with large volumes, or if no waste collection labware is needed, the Vacuum Manifold of the Extraction+ device enables continuous waste flow-through towards a collection bottle.
Equip your Andrew+ robot with the Microplate Gripper Tool to ensure automated movement of collection labware and racks into and out of the manifold.
Labware compatibility should not be stopping you from fully automating your SPE methods.
The Extraction+ device allows for automation of plate and cartridge-format SPE depending on the add-on kits you choose. Equip the Extraction+ device with the Plate, 1 cc, 3 cc or 6 cc Cartridge Kits for maximum consumable flexibility.
For maximum capture and no cross-contaminations, various SBS format collection plates can sit at different heights within the device thanks to dedicated plate spacers (3mm, 15mm and 17mm). Mix and match them to fine-tune your optimal configuration.
Specially designed, automation-friendly racks exist for both tubes and vials in 12x and 24x formats – to perfectly match up with the available cartridge adaptor formats.
Both collection plates and collection labware racks can be moved by the Andrew+ robot using the Microplate Gripper tool.
What would your Extraction+ labware configuration be?
includes:
• 3 mm, 15 mm, and 17 mm plate spacers
• Deepwell Microplate Domino
and Storage Plate Domino
includes:
• 1 cc Cartridge Adaptor
• 12 mm Vial Collection Rack
• Collection Rack Domino
includes:
• 3 cc Cartridge Adaptor
• 12 mm Vial Collection Rack
• Collection Rack Domino
Get to know the Extraction+ device in more detail,
see it in action with the Andrew+ Robot and learn how to use it.
The following work demonstrates the new capabilities and flexibility of the Andrew+ Pipetting Robot in combination with the Extraction+ Connected Device, controlled by OneLab™ Software, for fully automated Solid Phase Extraction (SPE) sample preparation in cartridge and plate SPE formats.
Described protocols use a simple 3-step SPE procedure (load, wash, and elute) in combination with Waters reversed-phase Oasis HLB cartridges (1 cc, 3 cc, and 6 cc size) and 96-well macro and µElution plates.
Remove the hassle of knowledge transfer for your complex SPE methods by securely sharing highly detailed methods that have been fine-tuned to your lab’s needs with the members of your connected lab space in the OneLab Software.
With OneLab Software, there’s no need to recalibrate your devices or re-re-redesign your methods each time before a run! Capture your SPE expertise with easily designed methods that can be executed by anyone from your connected lab, exactly as it was intended.
Thanks to additional connected devices working in conjunction with the Andrew+ Robot and Extraction+ device, complexify and scale up your workflows without complexifying your method creation.
OneLab Software will communicate with and trigger your connected devices in real-time during method executions, all while guiding you every step of the way.
Are you pumped for maximum SPE method repeatability with minimum effort?
Available now on Waters eCommerce.
Labware compatible
Check the OneLab Domino Catalog
Maximum pump rate
13 L/min
Measurement Range (absolute)
0-1030 mbar
Measurement Resolution accuracy TEB
<30 mbar
Resolution
0.1 mbar
Maximum operating altitude
2000 m
User interface
Through OneLab software
Dimensions (W x L x H)
200 x 200 x 275 mm
External power supply
Input 100-240 VAC, 1.4 A / output 24 VDC, 5 A, 120 W
Operating voltage
24 VDC
Relative humidity
80% at 37°C
Environment temperature operating range
+4 to +37 °C
Protection class
IP20
Weight
3.7 kg
Power or current rating
5 A
Overvoltage category DC port
Cat I
Network connectivity
Gigabit Ethernet / Wi-Fi 2.4 GHz and 5 GHz
Cleaning
Only with a wet tissue or isopropanol
Certification
CE, FCC, RoHS, WEEE
Pollution degree of the intended environment
Pollution degree 2
Warranty
1 year
Labware compatible
Check the OneLab Domino Catalog
Compatible adapters and spacers
Check the OneLab Domino Catalog
Dimensions
400 x 127 x 100 mm
Weight
1.5 kg
