Peltier+ is a compact, OneLab connected heating and cooling device designed to keep your samples at desired temperature throughout your workflow. It brings precise, programmable temperature control to the OneLab ecosystem, whether you’re working manually at the bench, using Pipette+, or automating protocols on the Andrew+ robot.
Peltier+ is optimized for standard labware:
Compatible with flat-bottom 96-well microplates commonly used in ELISA , endotoxin testing, and other absorbance/fluorescence assays.
Typical uses include:
PCR / RT-qPCR preparation: Keep master mixes and reagents chilled while you set up reactions.
Enzymatic assays: Maintain enzyme activity at controlled temperature during pipetting and incubation steps.
Cell-based and biochemical assays: Stabilize temperature-sensitive reagents and controls during plate setup.
Pre- and post-extraction steps: Hold samples at low temperature before extraction, or at controlled temperature before analysis.
Available now on Waters eCommerce.
Maximum heating temperature
99°C*
Heating rate
14°C/min*
Minimal cooling temperature
0°C*
Cooling rate
9°C/min*
Labware compatible
Check the OneLab Domino Catalog
Maximum operating altitude
2000 m
User interface
Through OneLab software
Dimensions (W x L x H)
170 x 162 x 100 mm
(The specified dimensions are subject to change according to the labware)
External power supply
Input 100-240 VAC, 1.4 A / output 24 VDC, 5 A, 120 W
Operating voltage
24 VDC
*Tested with 96-well PCR plate, skirted, LoBind, Eppendorf (0030129555) at room temperature of 26°C.
Relative humidity
80% at 37°C
Environment temperature operating range
+4 to +37 °C
Protection class
IP20
Weight
1.50 kg
Power or current rating
5 A
Overvoltage category DC port
Cat I
Network connectivity
Gigabit Ethernet / Wi-Fi 2.4 GHz and 5 GHz
Cleaning
Only with a wet tissue or isopropanol
Certification
CE, FCC, RoHS, WEEE
Pollution degree of the intended environment
Pollution degree 2
Warranty
1 year
